In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so you get something that looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can make certain that nothing will leak when you put the mask on. Make sure that the edges are cut so the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that dog respirator mask you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so you don’t end up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain that the ears are level and make sure that it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you will have to do some sanding to be certain it is secure on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.